GMC Yukon Maintenance Schedule

The GMC Yukon is a full-size eight-passenger SUV from GMC, offering up powerhouse performance specs and high-tech features on the Omaha roads. The Yukon is powered by a standard 5.3L V8 engine and a 10-speed automatic transmission, while upper-level trims such as the AT4 and Denali can be upgraded with a 6.2L V8. Inside the cabin, the Yukon is outfitted with a 10.2-inch diagonal infotainment display, premium leather upholstery, and a 12-inch diagonal Driver Information Center that allows you to see all the functions of your vehicle at a glance.

If you’re driving a GMC Yukon, the easiest way to keep it in the best condition possible is to regularly bring it in for service. The intervals of these services vary and include things like oil changes, tire rotations, and various inspections and replacements. In general, GMC follows a maintenance schedule with intervals of every 7,500 miles, but the service team at Sid Dillon Buick GMC Fremont has more details on the GMC Yukon maintenance schedule in the guide below!

Standard GMC Yukon Service Schedule

If you stick to the GMC Yukon maintenance schedule of 7,500-mile intervals, you’ll probably be bringing your SUV in for a service appointment every 7 to 8 months of drive time. Your owner’s manual will give you more specific information, but here’s a general overview of what you can expect from the seven most important service milestones:

After 7,500 miles: 

• Rotate tires
• Check oil level and oil life percentage
• Change oil and filter if needed
• Check engine air filter and change if needed

After 15,000 miles:

• All 7,500-mile services
• Replace front and rear wiper blades

After 22,500 miles: 

• All 7,500-mile services
• Replace passenger compartment air filter
• Replace brake pads

After 45,000 miles:

• All 7,500-mile services
• Replace front and rear wiper blades
• Replace passenger compartment air filter
• Replace brake pads

After 75,000 miles: 

• All 7,500-mile services
• Replace front and rear wiper blades
• Replace hood and/or body lift support gas struts

After 97,500 miles: 

• All 7,500-mile services
• Change transfer case fluid
• Replace spark plugs, inspect spark plug wires and/or boots

After 150,000 miles: 

• All 7,500-mile services
• Flush cooling system
• Drain and fill engine cooling system
• Visually inspect accessory drive belts
• Replace front and rear wiper blades
• Replace hood and/or body lift support gas struts

DIY GMC Yukon Maintenance

The most important thing you can do to keep your GMC Yukon running smoothly in Lincoln is to bring it in for routine maintenance, but there are also some DIY home services you can do as well! These are all relatively easy and can be performed right from your garage. You can perform them as often as you want, but we recommend taking a few minutes once a month or so. Here’s what you can do:

• Check to see if the check engine light is on
• Clean the interior and exterior
• Make sure all the interior and exterior lights work
• Check tire pressure and tread
• Make sure windshield wiper fluid is filled

Service Your GMC Yukon at Sid Dillon Buick GMC Fremont

If you’ve arrived at one of your 7,500-mile service intervals, go ahead and schedule an appointment on our website and we’ll get you back on the Columbus roads in no time! You can also contact us with any questions about the services we offer, and a member of our team will be happy to help you out. You can also take advantage of our service specials if you’re looking to save on your next appointment!